6EP1353-2BA00 SIEMENS

Welcome, thank you for your trust, The seller has more than $1526000 worth of industrial control products inventory.hope we can help you solve your problem!!!

  We Can transport to the world!!!

*******************************************************

Welcome, thank you for your trust, The seller has more than $1526000 worth of industrial control products inventory.hope we can help you solve your problem!!!

  We Can transport to the world!!!

*******************************************************

6EP1353-2BA00 SIEMENS Servo Controller In Stock



An external power supply is required (24 V for a 75 W motor and

48 V for a 300 W motor, refer to Chapter 2.6.1 or 2.6.2 for technical

data).



The maximum conductor cross–section for the load power supply is

4 mm2. If the power supply being used can supply more current

than is permissible for the cable, then the appropriate slow–acting

fuses must be provided (e.g. Neozed fuse).



A power management module (DC PMM) can optionally be connected between the external load power supply and the input terminals of the SIMODRIVE POSMO A. The DC PMM serves to eliminate the regenerative feedback energy and to limit the conducted

noise. For higher levels of regenerative feedback energy, a Power

Management Module Extension (DC–PMM_E/48 V) can be connected (refer to Chapter 2.2.3).



If the bus communications and position sensing are to remain active

even with the load power supply switched–out, then an optional

electronics power supply (24 V 20 %) can be used. The cables

are routed in the ET 200X bus cable (distributed peripheral system).



A BERO can only be connected as type 3–wire PNP.



The length of the I/O cables, their ground cables as well as their 

24 V power supply cables may be a maximum of 30 m long (refer to

Table 2-2).

Product details:

6EP1353-2BA00 SIEMENS Servo Controller

Contact information：

Contact person：Luna Chen

Email Address:：sales6@saulplc.com

WhatApp： +86 13358378970

We look forward to your inquiry and will get back to you as soon as possible.

We have the same series of models in stock. If you don't find the model you need, please contact us and we will provide you with an official quotation！